Industry: Aerospace/Defense Position: Field Quaity Engineer Location: Primary Remote 80% of the time. Potential travel may occur within regional area. Duration: 1 year Frequency: Full-time Pay Range: $60/hr - $65/hr   Duties: First Article Inspection Reports (FAIR) - Using the First Article Inspection process, IAW customer procedures. - Review and disposition Supplier FAIR packaged in Net Inspect and shall ensure compliance with AS9102 industry standard requirements. - Activities to include paperwork review, over-inspection, and working with the supplier to resolve any non-compliance with the AS9102 & Customer requirements.      Self-Release (SR) Audits - Using the Product Release process IAW checklist & Customer procedures the FQE Self Releases  Audits at assigned suppliers. - Activities for completion of SR Audits will include paperwork review, working with suppliers to resolve non-compliance to the Customer and industry requirements    APQP - APQP review activities will be in accordance with Customer procedures and industry requirements at assigned suppliers. - Activities shall include review of APQP packages, artifact checklist review and disposition of APQP artifacts and Part Submission warranting support. - FQE shall work with their assigned suppliers to resolve non-compliances to the requirements.       Required Skills - Experience in reviewing Advanced Product Quality Packages (APQP) - Experience in reviewing and approving First Article Inspection Reports (FAIRs) per AS9102. - Must be proficient in Geometrical, Dimension and Tolerancing. (GD&T) - Must be able to pass a written GD&T exam with a score of 90% or higher. - Experience with layout and precision inspection techniques and the utilization of inspection hand tools to validate product conformity. - Demonstrated strong leadership, interpersonal and communication skills. - Quality engineering experience. (ASQ, CQA, or CQE certifications) - Knowledge of various manufacturing processes and product family’s - In-depth knowledge & usage of Root Cause Corrective Actions (RCCA) tools - Working knowledge of ISO9001 or equivalent Quality Management System (QMS) - Experience performing audits for customer Self Release Audit Program. - Demonstrated ability as a self-starting, self-directed individual. - Demonstrated technical knowledge of mechanical, Electro Mechanical and/or electrical products & processes. (Depends on location) - Technical knowledge of castings (Depends on location) - Technical knowledge of Circuit-Card Assemblies (Depends on location) - Proficient using common software (MS Word, Excel, Power Point, Project, etc.) - Must complete the Customer Job Qualifications requirements within 6 months. - Must be a citizen of the country that the work will be performed in - BA/BS degree in a technical discipline (i.e., engineering, manufacturing, quality assurance) with 5 years of experience in aerospace, automotive and/or other related industries - In lieu of a formal education, at least 13 years of progressive experience in aerospace, automotive and/or other related industries Desirable Skills - IPC 610 certified or trained. - Working knowledge of AS9100 Quality Management System requirements - Process control & continuous improvement tools. - ASQ, CQA, or CQE certification - RAB auditor accreditation - Experience managing projects.   “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law.  Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”

Industry: Aerospace/Defense Position: Field Quaity Engineer Location: Primary Remote 80% of the time. Potential travel may occur within regional area. Duration: 1 year Frequency: Full-time   Duties: First Article Inspection Reports (FAIR) - Using the First Article Inspection process, IAW customer procedures. - Review and disposition Supplier FAIR packaged in Net Inspect and shall ensure compliance with AS9102 industry standard requirements. - Activities to include paperwork review, over-inspection, and working with the supplier to resolve any non-compliance with the AS9102 & Customer requirements.      Self-Release (SR) Audits - Using the Product Release process IAW checklist & Customer procedures the FQE Self Releases  Audits at assigned suppliers. - Activities for completion of SR Audits will include paperwork review, working with suppliers to resolve non-compliance to the Customer and industry requirements    APQP - APQP review activities will be in accordance with Customer procedures and industry requirements at assigned suppliers. - Activities shall include review of APQP packages, artifact checklist review and disposition of APQP artifacts and Part Submission warranting support. - FQE shall work with their assigned suppliers to resolve non-compliances to the requirements.       Required Skills - Experience in reviewing Advanced Product Quality Packages (APQP) - Experience in reviewing and approving First Article Inspection Reports (FAIRs) per AS9102. - Must be proficient in Geometrical, Dimension and Tolerancing. (GD&T) - Must be able to pass a written GD&T exam with a score of 90% or higher. - Experience with layout and precision inspection techniques and the utilization of inspection hand tools to validate product conformity. - Demonstrated strong leadership, interpersonal and communication skills. - Quality engineering experience. (ASQ, CQA, or CQE certifications) - Knowledge of various manufacturing processes and product family’s - In-depth knowledge & usage of Root Cause Corrective Actions (RCCA) tools - Working knowledge of ISO9001 or equivalent Quality Management System (QMS) - Experience performing audits for customer Self Release Audit Program. - Demonstrated ability as a self-starting, self-directed individual. - Demonstrated technical knowledge of mechanical, Electro Mechanical and/or electrical products & processes. (Depends on location) - Technical knowledge of castings (Depends on location) - Technical knowledge of Circuit-Card Assemblies (Depends on location) - Proficient using common software (MS Word, Excel, Power Point, Project, etc.) - Must complete the Customer Job Qualifications requirements within 6 months. - Must be a citizen of the country that the work will be performed in - BA/BS degree in a technical discipline (i.e., engineering, manufacturing, quality assurance) with 5 years of experience in aerospace, automotive and/or other related industries - In lieu of a formal education, at least 13 years of progressive experience in aerospace, automotive and/or other related industries Desirable Skills - IPC 610 certified or trained. - Working knowledge of AS9100 Quality Management System requirements - Process control & continuous improvement tools. - ASQ, CQA, or CQE certification - RAB auditor accreditation - Experience managing projects.   “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law.  Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”

  Location: Ankara, Turkey  Schedule: Approx 16 hrs / week; could increase after initial on-site Contract: 60 days with possible extension     Seeking an experienced Aerospace Quality Source Inspector local to Ankara, Turkey to support inspection and root cause corrective actions regarding current quality issues. As the on-site focal for our customer, ensuring quality product, including but not limited to: machined and sheet metal components within a rear pressure bulkhead assembly.    Job Description: - Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications. - The inspector will be required to report inspection accept / reject information directly to the customer via web application. - Recommending neccessary adjustments and changes to production processes - Containment of nonconforming product  Requirements: - Candidate must have practical experience performing in-process and final inspections on complex machined parts, composite parts, assemblies, and / or sub-assemblies. - The inspections will be performed to engineering requirements specified per ANSI Y14.5 – Geometric Dimensioning and Tolerance (GD&T) - Must have the ability to read / interpret engineering drawings and Purchase Orders (POs). - The candidate must have experience using various mechanical inspection tools, such as micrometers and calipers. - Experience performing First Article Inspections (FAIs) in accordance to the AS9102 standard and knowledge is required. Ideal candidate will have a minimum of five years’ experience performing inspections in aerospace or military / defense manufacturing with proficiency using Microsoft Word and Excel. - Candidate should be computer savvy and own a laptop for this assignment. - Minimum 5 years mechanical source inspection experience. Experience must be within the last 2 years in aerospace or military / defense manufacturing. - Minimum 2 years of hands on first article inspection (FAI) experience to AS9102. This must be a strong knowledge and understanding. - Minimum 5 years’ experience inspecting Complex Machine Parts/Assemblies/Composite Parts. - Candidate must have a strong knowledge and understand of GD&T per ANSI Y. 14.5 - Knowledge of tight tolerance is required. - Candidate must have mobile phone availability and their own laptop, with e-mail and internet access, to bring on site to the supplier location. - Strong computer skills. Source inspection information is input into the customer's system in SAP. - Will be working as an independent contractor (1099). - Must have LLC/DBA or able to obtain an LLC/DBA

Industry: Aerospace/Defense Position: Field Quaity Engineer Location: Primary Remote 80% of the time. Potential travel may occur within regional area. Duration: 1 year Frequency: Full-time   Duties: First Article Inspection Reports (FAIR) - Using the First Article Inspection process, IAW customer procedures. - Review and disposition Supplier FAIR packaged in Net Inspect and shall ensure compliance with AS9102 industry standard requirements. - Activities to include paperwork review, over-inspection, and working with the supplier to resolve any non-compliance with the AS9102 & Customer requirements.      Self-Release (SR) Audits - Using the Product Release process IAW checklist & Customer procedures the FQE Self Releases  Audits at assigned suppliers. - Activities for completion of SR Audits will include paperwork review, working with suppliers to resolve non-compliance to the Customer and industry requirements    APQP - APQP review activities will be in accordance with Customer procedures and industry requirements at assigned suppliers. - Activities shall include review of APQP packages, artifact checklist review and disposition of APQP artifacts and Part Submission warranting support. - FQE shall work with their assigned suppliers to resolve non-compliances to the requirements.       Required Skills - Experience in reviewing Advanced Product Quality Packages (APQP) - Experience in reviewing and approving First Article Inspection Reports (FAIRs) per AS9102. - Must be proficient in Geometrical, Dimension and Tolerancing. (GD&T) - Must be able to pass a written GD&T exam with a score of 90% or higher. - Experience with layout and precision inspection techniques and the utilization of inspection hand tools to validate product conformity. - Demonstrated strong leadership, interpersonal and communication skills. - Quality engineering experience. (ASQ, CQA, or CQE certifications) - Knowledge of various manufacturing processes and product family’s - In-depth knowledge & usage of Root Cause Corrective Actions (RCCA) tools - Working knowledge of ISO9001 or equivalent Quality Management System (QMS) - Experience performing audits for customer Self Release Audit Program. - Demonstrated ability as a self-starting, self-directed individual. - Demonstrated technical knowledge of mechanical, Electro Mechanical and/or electrical products & processes. (Depends on location) - Technical knowledge of castings (Depends on location) - Technical knowledge of Circuit-Card Assemblies (Depends on location) - Proficient using common software (MS Word, Excel, Power Point, Project, etc.) - Must complete the Customer Job Qualifications requirements within 6 months. - Must be a citizen of the country that the work will be performed in - BA/BS degree in a technical discipline (i.e., engineering, manufacturing, quality assurance) with 5 years of experience in aerospace, automotive and/or other related industries - In lieu of a formal education, at least 13 years of progressive experience in aerospace, automotive and/or other related industries Desirable Skills - IPC 610 certified or trained. - Working knowledge of AS9100 Quality Management System requirements - Process control & continuous improvement tools. - ASQ, CQA, or CQE certification - RAB auditor accreditation - Experience managing projects.   “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law.  Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”

Industry: Aerospace/Defense   Position: Source Inspection   Location: Mount Dora,FL   Frequency – 1 visits per Day 3 hours each   Duration: ASAP-5/2024       Job Description: Verifies completed product to purchase order, drawing and associated specifications. Ability to adequately inspect Aerospace level mechanical components and assemblies including welded and machined parts for compliance with industry and Customer specifications. Knowledge of standard inspection tools to include CMMs is required. Previous machine shop experience, final inspections and Aerospace products.   Requirements: - 5+ Years experience in Aerospace Receiving and/or Final Inspection - Must be a US Citizen - 5+ years’ experience in FAI and AS9102       Skills Requirement: - Attention to Detail - Strong communication skills - Organized - Able to operate computers

*** Supplier Quality Engineer / Assurance Engineer (Defence) ***   Currently seeking an experienced Supplier Quality Engineer to support a program where we need to deploy someone within a supplier facility near Stockport.  With a focus on ensuring that acceptable standards are met and continually achievable, the role will provide support across a number of assigned projects, monitoring progress of hardware and electrical aspects of complex system development for technical and process compliance with a focus on oversight, inspection and acceptance of system deliverables.   Responsibilities:  - Conduct QA activities during initial acquisition and programme execution in accordance with company processes and procedures - Provide independent oversight on assigned programmes to ensure compliance with all required external standards, internal command media and contractual requirements - Participate in bid and programme Gate Reviews to assist the teams in achieving mission success - Work with multiple teams to assure Supplier Quality, including supplier on-boarding activities and ongoing supplier performance management, and ensuring projects complete quarterly assessments of critical suppliers - Establish effective relationships with key supplier quality personnel - Assist with the flow down of QA requirements to suppliers - Support Risk and Opportunity Management activities on bids and programmes - Support sub-contract management activities during programme execution - Develop and document any programme-specific processes required - Ensure customer deliverables are of acceptable quality and meet all required standards and contractual requirements - Liaise with customers and other third parties including suppliers regarding all aspects of Mission and Quality Assurance for assigned projects - Provide QA reports on a weekly and as-required basis, escalating significant issues or risks to the Programme Manager and the Mission Assurance Manager - Collect, interpret and present QA metrics to the Programme Manager, Mission Assurance Manager and the Technical Director to support the development of process improvement initiatives - Follow up audits to validate the resolution of non-conformities and findings raised   Background and Experience:  - Quality Assurance experience, ideally in a systems engineering environment - Experience of UK MOD assurance requirements and working practices - Track record of delivering to identified Quality Assurance requirements - IPC 610/620 Certification for electrical inspection - Experience of leading quality improvement activities, including lessons learnt, root cause analysis - Experience of risk identification, reporting and management - A good understanding of systems engineering principles and methodologies - Sound working knowledge of Defence engineering standards and working practices including AQAP 2110, Def Stan 05-57, IEC 61508 - Knowledge of ISO 9001 and 27001 - Self-motivated and able to work both autonomously and as part of a wider team - Excellent interpersonal skills, able to engage effectively with a wide range of stakeholders, suppliers and customers - Strong analytical and problem-solving skills - Proficient IT skills, specifically in MS Office tools - Flexible and responsive attitude - Proficient at multi-tasking, working under pressure and to tight deadlines - Excellent attention to detail   Additional Requirements: - Must be a UK National (due to program security restrictions) - Ideally holds UK Government Security Clearance - Ability to travel within the UK, to include visits to our customer location for progress meetings.   This activity is inside IR35 (Umbrella Company Required)  

*** Supplier Quality Engineer / Assurance Engineer (Defence) ***   Currently seeking an experienced Supplier Quality Engineer to support a program where we need to deploy someone within a supplier facility near Bedford.  With a focus on ensuring that acceptable standards are met and continually achievable, the role will provide support across a number of assigned projects, monitoring progress of hardware and electrical aspects of complex system development for technical and process compliance with a focus on oversight, inspection and acceptance of system deliverables.   Responsibilities:  - Conduct QA activities during initial acquisition and programme execution in accordance with company processes and procedures - Provide independent oversight on assigned programmes to ensure compliance with all required external standards, internal command media and contractual requirements - Participate in bid and programme Gate Reviews to assist the teams in achieving mission success - Work with multiple teams to assure Supplier Quality, including supplier on-boarding activities and ongoing supplier performance management, and ensuring projects complete quarterly assessments of critical suppliers - Establish effective relationships with key supplier quality personnel - Assist with the flow down of QA requirements to suppliers - Support Risk and Opportunity Management activities on bids and programmes - Support sub-contract management activities during programme execution - Develop and document any programme-specific processes required - Ensure customer deliverables are of acceptable quality and meet all required standards and contractual requirements - Liaise with customers and other third parties including suppliers regarding all aspects of Mission and Quality Assurance for assigned projects - Provide QA reports on a weekly and as-required basis, escalating significant issues or risks to the Programme Manager and the Mission Assurance Manager - Collect, interpret and present QA metrics to the Programme Manager, Mission Assurance Manager and the Technical Director to support the development of process improvement initiatives - Follow up audits to validate the resolution of non-conformities and findings raised   Background and Experience:  - Quality Assurance experience, ideally in a systems engineering environment - Experience of UK MOD assurance requirements and working practices - Track record of delivering to identified Quality Assurance requirements - IPC 610/620 Certification for electrical inspection - Experience of leading quality improvement activities, including lessons learnt, root cause analysis - Experience of risk identification, reporting and management - A good understanding of systems engineering principles and methodologies - Sound working knowledge of Defence engineering standards and working practices including AQAP 2110, Def Stan 05-57, IEC 61508 - Knowledge of ISO 9001 and 27001 - Self-motivated and able to work both autonomously and as part of a wider team - Excellent interpersonal skills, able to engage effectively with a wide range of stakeholders, suppliers and customers - Strong analytical and problem-solving skills - Proficient IT skills, specifically in MS Office tools - Flexible and responsive attitude - Proficient at multi-tasking, working under pressure and to tight deadlines - Excellent attention to detail   Additional Requirements: - Must be a UK National (due to program security restrictions) - Ideally holds UK Government Security Clearance - Ability to travel within the UK, to include visits to our customer location for progress meetings.   This activity is inside IR35 (Umbrella Company Required)  

Industry: Aerospace/Defense Position: Source Inspection Location: Longview,TX Frequency – 2 visits per Year 4 hours each Duration: 1 Year   Job Description: Verifies completed product to purchase order, drawing and associated specifications. Ability to adequately inspect Aerospace level mechanical components and assemblies including welded and machined parts for compliance with industry and Customer specifications. Knowledge of standard inspection tools to include CMMs is required. Previous machine shop experience, final inspections and Aerospace products. Skills Requirement: - Attention to Detail - Strong communication skills - Organized - Able to operate computers Requirements: - 5+ Years experience in Aerospace Receiving and/or Final Inspection - Must be a US Citizen - 5+ years’ experience in FAI and AS9102 - Will be working as an independent contractor (1099). - Must have LLC/DBA or able to obtain an LLC/DBA

Industry: Aerospace/Defense Position: Source Inspection Location: Aranjuez, Spain Frequency – 1 visits per Year 4 hours each Duration: 1 Week   Job Description: Verifies completed product to purchase order, drawing and associated specifications. Ability to adequately inspect Aerospace level mechanical components and assemblies including welded and machined parts for compliance with industry and Customer specifications. Knowledge of standard inspection tools to include CMMs is required. Previous machine shop experience, final inspections and Aerospace products.   Requirements: - 5+ Years experience in Aerospace Receiving and/or Final Inspection - Must be a US Citizen - 5+ years’ experience in FAI and AS9102 - experience with MIL-STD-130       Skills Requirement: - Attention to Detail - Strong communication skills - Organized - Able to operate computers

Industry: Aerospace/Defense Position: Source Inspection Location: Groton,CT Frequency – 12 visits per Year 5 hours each Duration: 1 Month     Job Description: Verifies completed product to purchase order, drawing and associated specifications. Ability to adequately inspect Aerospace level mechanical components and assemblies including welded and machined parts for compliance with industry and Customer specifications. Knowledge of standard inspection tools to include CMMs is required. Previous machine shop experience, final inspections and Aerospace products. Skills Requirement: - Attention to Detail - Strong communication skills - Organized - Able to operate computers\ Requirements: - 5+ Years experience in Aerospace Receiving and/or Final Inspection - Must be a US Citizen - 5+ years’ experience in FAI and AS9102 - experience with IPC-610 and 620 - Will be working as an independent contractor (1099). - Must have LLC/DBA or able to obtain an LLC/DBA

Industry: Aerospace/Defense Position: Source Inspection Location: Medford, WI Frequency – 1 visits per Month 2 hours each Duration: 1 Month     Job Description: Verifies completed product to purchase order, drawing and associated specifications. Ability to adequately inspect Aerospace level mechanical components and assemblies including welded and machined parts for compliance with industry and Customer specifications. Knowledge of standard inspection tools to include CMMs is required. Previous machine shop experience, final inspections and Aerospace products. Skills Requirement: - Attention to Detail - Strong communication skills - Organized - Able to operate computers Requirements: - 5+ Years experience in Aerospace Receiving and/or Final Inspection - Must be a US Citizen - 5+ years’ experience in FAI and AS9102 - Will be working as an independent contractor (1099). - Must have LLC/DBA or able to obtain an LLC/DBA

Industry: Aerospace/Defense   Position: Source Inspection   Location: Liverpool, NY   Frequency – 1 visits per Month 4 hours each   Duration: ASAP-3/2025      Job Description: Verifies completed product to purchase order, drawing and associated specifications. Ability to adequately inspect Aerospace level mechanical components and assemblies including welded and machined parts for compliance with industry and Customer specifications. Knowledge of standard inspection tools to include CMMs is required. Previous machine shop experience, final inspections and Aerospace products.   Skills Requirement: - Attention to Detail - Strong communication skills - Organized - Able to operate computers Requirements: - 5+ Years experience in Aerospace Receiving and/or Final Inspection - Must be a US Citizen - 5+ years’ experience in FAI and AS9102 - Will be working as an independent contractor (1099)   - Must have LLC/DBA or able to obtain an LLC/DBA  

Quality Inspector – CCA & Electronics – Level 3   Location: Baltimore, MD Duration: as needed based on customer/supplier requirements Frequency: 1-2 x per week; (or) as needed. Pay Rate:Based On Experience, competitive wages ranging from $30.00/hr. - $35.00/hr. - Travel Time paid (round trip) to and from supplier facility *must be within 90 miles from Baltimore MD* - Mileage Reimbursement at GSA rates. What to Expect:   This is a contract position in which you will be supporting our client in Baltimore, MD. Interfacing directly with the customer to ensure all requirements and schedules are met. You will be working on-site at supplier facility, as needed, assuring the quality of components and assemblies, specifically Circuit Card Assemblies (CCA)   Job Description: - Conduct incoming inspection of CCA - In Process witness inspections - Ability to detect defects on highly complex products, verify documentation packages to industry/commodity-specific standards, classify defect types, and verify rework conducted during the time of the inspection. - Other quality related tasks Qualifications: - Hands-on visual inspection experience - Familiarity with build process and inspection of complex circuit cards - Knowledge of ISO 9000 and AS9100 - Experience performing First Article Inspections (FAIs) - Experience with visual and mechanical inspection of a variety of electronics including but not limited to: PCB, PCBA, Active and Passive Components - Ability to use predetermined methods and specifications to visually inspect in-process and completed products - Knowledge of various measurement devices such as calipers, scales, dial indicators, micrometers, microscope etc. - Detail Oriented and have strong organizational skills - Must be able to work in manufacturing environment  - Must be able to stand for periods of time   “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law.  Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”

We are currently seeking 2 Process Engineers.   Job Requirements - Provide assistance to the Material Review Board process on suspected non-Conforming assemblies and enter/update Q-Pulse for the disposition of the product. - Create Work Instructions/job cards to facilitate Spoiler Repairs. - Airbus SAP access and Structures 20 (Concession Originator) to raise and submit concessions, preferred but not essential for requested role as training will be provided as required. - Excel Competence required. - Smartsheet awareness (required but not essential) to enter data into shop floor tablet. - Knowledge of Airbus products and specs is advantageous. - Working with the Process Engineering Manager, ensure feedback of defects are communicated to the respective workstations. Review processes carried out within the workstations and highlight areas of non-compliance to process together with potential improvements. This role falls outside IR35  

Industry:  Aerospace/Defense Position:  FAI Quality Engineer Location:  Irvine, CA Job:  2024-12901 Duration:  3–4 months Frequency:  Full-Time (40 hours) Pay Range:  $50 -$55/hour     Job Description:   - The Senior Quality Inspector shall perform First Article Inspections (FAIs) in accordance with Aerospace Standard AS9102. - Performing First Article Gap Analysis, identify and report discrepancies - Generate first article inspection (FAI) projects to be used during CMM inspection. - Confirmation that the First Article Inspection Record (FAIR) is accurate and completed for a part number or assembly and that all part, product, and characteristic accountability aspects are addressed prior to approval. - Perform FAI package reviews and/or audits to ensure compliance with FAI requirements. - The candidate will ensure the accuracy and completeness of all engineering design requirements records on the AS9102 forms. - Ensure CMM’s integrity, calibration, qualification, etc. - The inspections will be performed to engineering requirements specified per ANSI Y14.5 – Geometric Dimensioning and Tolerance (GD&T) or equivalent standard. - Determines unstated or hidden dimensions from a blueprint, working with fractions, decimals, and trigonometry. - Inspect parts, assemblies and finished products in accordance with specifications and/or legal requirements. - Follows company’s inspection guidelines to conduct critical non-routine visual, dimensional, mechanical, electrical test and functional inspections on a wide variety of components, assemblies, equipment, systems, supplies and materials. - Produce inspection reports as appropriate / requested. - Perform other duties as requested, directed or assigned. Skills Requirement: - Seven-plus years related experience or equivalent combination of education and experience. - First article inspector must have extensive knowledge and practical experience of the AS9102 standard. - Previous experience in FAIR review / sign-off - Strong background in manufacturing in the aerospace or military / defense industries required. - Practical experience inspecting aerospace components and assemblies is necessary as well as knowledge of applicable industry standards - Experience working with aluminum tubing a plus - Inspector must be able to read and understand Purchasing documents, specifications, shop planning, drawings, 3D models and other technical instructions. - Good communication skills, both written and oral. - Inspector must have proficient computer skills using Microsoft Word and Excel. - Experience with Net-Inspect software - Ability to program Inspection Projects using Discus, PC-DMIS, Calipso or Verisurf software. - Strong GD&T knowledge  - Ability to read and understand blueprints. - Must be able to work in a fast paced environment, be detail orientated, self-motivated. - Ability to use measuring tools such as calipers, micrometers, height gages, dial indicators, oscilloscopes, component testers. - Ability to analyze data for accuracy and interpret results. - Must be proficient in use of computers and software programs. - Must be a team player and process driven. - The candidate needs to be able to access and use web-based tools and applications with little to no direction. - Thorough understanding and experience with AS9100 Standard - Thorough understanding and experience with ISO9001 “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law.  Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics

Industry:  Aerospace/Defense Position:  Mechanical Inspector Location:  San Diego, CA Job:  2024-12898 Duration:  3–6 months Frequency:  Full-Time (40 hours) Pay Range:  $27 -$30/hour     Job Description: The quality inspector shall perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies. Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications. The inspector will be required to report inspection accept / reject information directly to the customer via web application.   Duties/Responsibilities: - Shall assist with dimensional validation and documentation review in the Receiving Inspection Department   Requirements: - Candidate must have practical experience performing receiving inspections on machined parts, assemblies, and / or sub-assemblies. - The inspections will be performed to engineering requirements specified per ANSI Y14.5 – Geometric Dimensioning and Tolerance (GD&T) or equivalent standard. - Must have the ability to read / interpret engineering drawings and Purchase Orders (POs). - The candidate must have experience using various mechanical inspection tools, such as micrometers and calipers. - Experience performing First Article Inspections (FAIs) in accordance with the AS9102 standard and knowledge of applicable industry standards. - Extensive broad ranging aircraft commodity knowledge and experience to include: structures, mechanical assemblies, precision machined parts, sheet metal parts, castings and forgings, raw materials, and consumables, and special processes (e.g. welding, coatings, NDT, or Heat Treat, Bonding). - Experience with Digital Product Definition-(digital data) -reading/interpreting only. - Ideal candidate will have a minimum of five years experience performing inspections in aerospace or military / defense manufacturing with proficiency using Microsoft Word and Excel. - Candidate should be computer savvy and own a laptop for this assignment. - Thorough understanding and experience with AS9100 Standard - Thorough understanding and experience with ISO9001   “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law.  Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”  

Industry: Aerospace/Defense  Position: Source Inspector  Location: Georgia  Duration: Ongoing  Frequency: 8 hours/week      Job Description: - The quality inspector shall travel to various supplier facilities to perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies.  - Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications.  - The inspector will be required to report inspection accept / reject information directly to the customer via web application.   Requirements: - Candidate must have practical experience performing in-process and final inspections on machined parts, assemblies, and / or sub-assemblies. - The inspections will be performed to engineering requirements specified per ANSI Y14.5 – Geometric Dimensioning and Tolerance (GD&T) or equivalent standard.  - Must have the ability to read / interpret engineering drawings and Purchase Orders (POs). - The candidate must have experience using various mechanical inspection tools, such as micrometers and calipers.  - Experience performing First Article Inspections (FAIs) in accordance to the AS9102 standard.  -  Ideal candidate will have a minimum of five years experience performing inspections in aerospace or military / defense manufacturing with proficiency using Microsoft Word and Excel.  - Will be working as an independent contractor (1099). - Must have LLC/DBA or able to obtain an LLC/DBA Testing Requirements: - AS9102 REV B Assessment  - Mechanical Commodity Inspection Assessment

Industry: Aerospace/Defense Position: Supplier Quality Representative Location: Eynon, Pennsylvania Frequency: 20-30/hrs per week - W2 Duration: Part time through 2024, possible full time/temp-to-hire in 2025 Pay Range $28.00 - $40.00 based on qualifications.   Job Description:  - Looking for a supplier quality specialist to assist with sorting parts for clean points and assist with trouble shooting supplier quality issues - Must be able to work with(and travel to) casting and forging suppliers on site to assist with Root Cause and Corrective Actions of the quality issues.  - Travel is regional to the northeast, with two primary suppliers in New Hampshire. Requirements:  - Should have various casting process experience (sand, die, investment, casting processes), forging experience, heat treating experience and machining experience is a plus too. - Blueprint reading and experience working in manufacturing environment is required. - 7+ years in aerospace/defense manufacturing and quality is requried. - Must have good communication skills and is proficient in computer use such as Microsoft Word and Excel.   “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law.  Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”

Industry: Aerospace/Defense Position: Quality Engineer Location: Portland, OR Frequency – 35 Hours per week - W2 Duration: On-Going Pay Range:$38.00-$45.00   Job Description: - Utilize quality science techniques to effect continuous performance improvement at assigned suppliers - Reviews, analyzes, and reports on quality discrepancies related to process, assembly, manufacturing, mechanical, electrical, hydraulic, or electro-mechanical systems - Ensure that performance and quality of products conform to established company and regulatory standards - Use surveillance and auditing techniques to identify opportunities for process and product improvement - Interfaces with manufacturing, engineering, customer, supplier, and procurement (as appropriate) to ensure requirements / expectations are satisfied - Facilitate development of supplier recovery plans - Monitor and evaluate supplier process for compliance to purchase order and engineering requirements - Collaborate with supplier to investigate root cause and corrective actions when process or product deficiencies are detected - Identify, plan, and facilitate cross-functional improvement activities - Deploy variation management tools and techniques at select suppliers to mitigate risk - Have performed Quality System Audits, AS9102 First Article Reviews - computer proficiency and proficiency with MS Office products.   Additional Comments: - Travel is required and may extend beyond the local area. - Initial supplier assignments may change to meet customer requirements. - Work hours are not fixed or guaranteed and may extend beyond 40 hours per week to meet customer requirements. - Aerospace supplier experience is preferred and may be used as the primary selection criteria among equally qualified candidates.  Skills Requirement: - Attention to Detail - Strong communication skills - In process and Final Inspection Requirements: - 5+ Years experience in Aerospace Quality engineering  - Must be a US Citizen - 5+ years’ experience in FAI and AS9102     “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law.  Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”  

Industry: Aerospace/Defense Position: Source Inspector Location: Various, Michigan - (Clinton Township, Sterling Heights, Lapeer, Oxford, Romeo, Redford, Canton, Walled Lake, Chesterfield) Frequency: 25/hrs per week - W2 Duration: 1 Year  Pay Range $28.00 - $40.00 based on qualifications.   Job Description: - The quality inspector shall travel to various supplier facilities to perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies. - Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications. - The inspector will be required to report inspection accept / reject information directly to the customer via web application.   Requirements: - Candidate must have practical experience performing in-process and final inspections on machined parts, assemblies, and / or sub-assemblies. - The inspections will be performed to engineering requirements specified per ANSI Y14.5 – Geometric Dimensioning and Tolerance (GD&T) or equivalent standard. - Must have the ability to read / interpret engineering drawings and Purchase Orders (POs). - The candidate must have experience using various mechanical inspection tools, such as micrometers and calipers. - Ideal candidate will have a minimum of five years experience performing inspections in aerospace or military / defense manufacturing with proficiency using Microsoft Word and Excel. - Experience working with Welding is desired but not required     “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law.  Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”