Industry: Aerospace/Defense Position: Mechanical Inspector   Location: Cedar City, UT Duration: 8-12 weeks Frequency: On-demand / 20 hrs   Job Description: - Perform mechanical inspection using precision measuring devices/instruments at the supplier’s facility to verify compliance with drawings, standards/specifications, and other PO requirements - Verify material certifications against PO requirements, part marking where required and visually inspect for obvious defects/ damage Requirements: - Minimum 5 years of precision mechanical inspection experience is required - Strong understanding of, and experience with, ANSI Y 14.5 GD&T - Ability to read and interpret drawings and basic computer skills are a must - Experience working with tight tolerances - Hands-on mechanical inspection experience - Must have experience working with Mil-standards - Previous source inspection experience - Will be working as an independent contractor (1099). - Must have LLC/DBA or able to obtain an LLC/DBA  

Industry: Aerospace/Defense Position: Mechanical Inspector   Location: Pomona, CA Duration: 8-12 weeks Frequency: On-demand / 20 hrs   Job Description: - Perform mechanical inspection using precision measuring devices/instruments at the supplier’s facility to verify compliance with drawings, standards/specifications, and other PO requirements - Verify material certifications against PO requirements, part marking where required and visually inspect for obvious defects/ damage Requirements: - Minimum 5 years of precision mechanical inspection experience is required - Strong understanding of, and experience with, ANSI Y 14.5 GD&T - Ability to read and interpret drawings and basic computer skills are a must - Experience working with tight tolerances - Hands-on mechanical inspection experience - Must have experience working with Mil-standards - Previous source inspection experience - Will be working as an independent contractor (1099). - Must have LLC/DBA or able to obtain an LLC/DBA  

Industry: Aerospace/Defense Position: Mechanical Inspector   Location: Stevensville, MD Duration: 8-12 weeks Frequency: On-demand / 4 hours    Job Description: - Perform mechanical inspection using precision measuring devices/instruments at the supplier’s facility to verify compliance with drawings, standards/specifications, and other PO requirements - Verify material certifications against PO requirements, part marking where required and visually inspect for obvious defects/ damage Requirements: - Minimum 5 years of precision mechanical inspection experience is required - Strong understanding of, and experience with, ANSI Y 14.5 GD&T - Ability to read and interpret drawings and basic computer skills are a must - Experience working with tight tolerances - Hands-on mechanical inspection experience - Must have experience working with Mil-standards - Previous source inspection experience - Will be working as an independent contractor (1099). - Must have LLC/DBA or able to obtain an LLC/DBA  

Industry: Aerospace/Defense Position: Mechanical Inspector   Location: Nicktown, PA Duration: 8-12 weeks Frequency: On-demand / 30-40 hrs   Job Description: - Perform mechanical inspection using precision measuring devices/instruments at the supplier’s facility to verify compliance with drawings, standards/specifications, and other PO requirements - Verify material certifications against PO requirements, part marking where required and visually inspect for obvious defects/ damage Requirements: - Minimum 5 years of precision mechanical inspection experience is required - Strong understanding of, and experience with, ANSI Y 14.5 GD&T - Ability to read and interpret drawings and basic computer skills are a must - Experience working with tight tolerances - Hands-on mechanical inspection experience - Must have experience working with Mil-standards - Previous source inspection experienc - Will be working as an independent contractor (1099). - Must have LLC/DBA or able to obtain an LLC/DBA  

  We are looking for 1 X experienced Supplier Quality Engineers for our Aerospace Customer.   This is a 5 month contract role in Prestwick which will be working entirely on-site, with no working from home.   37 hours per week, over 5 days with an early finish on a Friday.   The role is outside IR35 so can be worked either through a limited company or an Umbrella Company.   Responsibilities - Responsible for the maintenance, control and quality performance of all Suppliers from a quality perspective, through the deployment of supplier reviews, regular recorded communications and surveillance activities. - Ensure that all supplier non-conformities are reviewed and where necessary, escalated using the appropriate Spirit processes to drive robust RCCA and get-well / improvement plans. - Ensure that the Prestwick Programs are adequately supported in terms of management of supplier quality issues, including clear communication of all issues. - Drive towards improved supplier quality performance through the creation of metrics for key processes and agreed targets, driving the use of APQP methodology in line with recognised industry requirements. - Report on supplier performance through regular internal KPI reviews. - To actively review and develop suppliers manufacturing processes, ensuring they are maintained within “control” limits and product Quality is achieved.   - Provide specialist supplier quality support to IPTs and other Functions (including investigation support). - Manage and support the supplier quality interface and ensure that all supplier quality issues and non-conformances  are managed to an agreed timescale.      - Report regularly on the quality performance of the supply chain, -   Co-ordinate the generation and deployment of Metrics to support business requirements   - Assist in the deployment of the Material Review Board (MRB) process. -  First Article Inspection/Verification (FAI/V) support to any major modifications or supplier transfer activities if required. Knowledge, Skills and Experience - Preferably be qualified to HNC / HND level in Quality or related Engineering discipline and/or have relevant experience in Quality Management and working to deadlines - Experience of auditing is preferred. - Have 5 years minimum relevant engineering experience, within a Quality or Manufacturing Engineering Aerospace environment. - Should also ideally possess knowledge of AS 9100 as well as regulatory authority approval, and certification requirements..     - Good communication skills – with the ability to interface at all levels within Spirit and suppliers. - Preferably experience of Airbus and Boeing products, engineering drawings and specification requirements. would be preferable. - A good working knowledge of Microsoft Packages – Word, PowerPoint, Excel, Power BI, Smartsheet and Access. - Experience in various manufacturing processes, able to walk the processes and effectively verify all key process parameters. (Metallic Machining, Detail Fabrication and Composite manufacturing experience) - Experience with practical problem solving, continuous improvement, root cause analysis and corrective action tool sets. - Experience with first article inspection to AS9102 requirements.  

Industry: Aerospace/Defense Position: Mechanical Source Inspector Location: Simi Valley, California Duration: On-going contract Frequency: 40/hrs per week    Job Description: - The selected candidate will provide advanced mechanical inspection using precision calibrated tools - The inspector will ensure that only conforming parts are introduced to the manufacturing floor - Utilize various inspection tools such as calipers, micrometers, thread gauges – checks dimensions/processes on parts or raw material to ensure compliance to manufacturing drawings/blueprints/specifications - Work closely with Design Engineering, Project Engineering and Manufacturing to ensure that all manufacturing and inspection activities are performed in compliance with process work documents and customer requirements - Ensures that in-process inspections are completed per engineering specifications during the production process - Perform mechanical, visual and dimensional inspections of parts using inspection hand tools. Document and facilitate disposition of any nonconforming material discovered during the inspection process - Perform Mechanical inspection using CMM (Coordinate Measuring Machine) - Perform receiving document review to ensure unbroken traceability to the respective OEM - Create “approval/reject” tags and document in the requisite databases - Perform First Article Inspections (FAI) to AS9102 guidelines ensuring the manufacturing processes are capable of producing parts that conform to specification and contractual agreements - Perform Final Inspection as required. Interface with customer portals using Net-Inspect and/or customer specified software - Perform verification/calibration of inspection, measuring and test equipment and associated tools - Perform “Internal Audits” to ensure that procedures, processes and protocols are being followed and are effective in their purpose as prescribed by the Quality Management System - Perform additional duties as assigned by the Quality Assurance Manager - Potentially serve as a DQR (Delegated Quality Representative) Requirements: - Experience with First Article Inspections (AS9102) - Have a working knowledge of CMM inspection; interpret inspection report data as it relates to manufacturing requirements - Possess general knowledge of Aerospace Quality Systems and International Standards - Must be familiar with standard concepts, practices and procedures with regards to inspection including proficiency in the use of CMM, comparator, micrometers, thread gauges and calipers - The ability to read blue prints, check dimensional properties of parts or raw material to ensure compliance to manufacturing drawings/blueprints and psecifications - Knowledge of Discus preferred - Must be proficient in the use of Microsoft Suite products.  A certain degree of creativity and flexibility in required - Knowledge of GD&T required - 5 or more years of experience in aerospace, automotive and/or other related industries

Structural Source Inspector   Currently seeking two mechanical Source Inspectors to support activity based at a supplier near Prague, Czech Republic for 3 months full-time (40 hours per week).   Job Description - Support our customer at their supplier location to perform inspection. - The inspector shall perform visual and dimensional inspections on manufactured parts, and / or assemblies. - Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications. - You will perform in process inspections, corrective actions and follow-ups. - The inspector will be required to report inspection accept / reject information. - Identify and document any non-conformance. Requirements - Candidate must have practical experience performing in-process and final inspections on parts and / or assemblies. - The inspections will be performed to engineering requirements specified per ANSI Y14.5 – Geometric Dimensioning and Tolerance (GD&T) or equivalent standard. - Must have the ability to read / interpret engineering drawings and Purchase Orders (POs). - The candidate must have experience using various mechanical inspection tools, such as micrometers and calipers.   - Ideal candidate will have a minimum of three years experience performing inspections in aerospace or military / defense manufacturing with proficiency using Microsoft Word and Excel. - Candidate should be computer savvy. - Valid passport potential training abroad.   Additional Requirements: - Must be a EU National

*** First Article Inspector / Quality Engineer ***   Currently seeking a detail oriented First Article Inspector / Quality Engineer to support an as-needed project in Birmingham.  Support will be 3 days per week for the first couple of weeks, then move to an on-demand basis, likely to be a 1 day per week / per fortnight moving forward.  The focus of the role is the accurate validation of Supplier FAI submissions, in line with the requirements of AS9102 and customer FAI standard.   Responsibilities: - Complete a thorough and accurate review of Supplier submitted FAIs to assure compliance to customer defined requirements, including those of AS9102. - Provide concise feedback to suppliers on any issues identified through the review process, following up with them verbally and by e-mail to facilitate updates to their FAI submission - Maintain FAI tracker for review status, outcome and any issues identified. - Communicate updates to the customer both verbally and in writing as necessary. Role Requirements: - A minimum of 3 years, in the last 5 years, aerospace experience in either a quality engineering or manufacturing engineering capacity - Strong and robust working knowledge of AS9102 at the current revision, in addition to a sound understanding of the requirements of AS9100. - The ability to read and interpret complex engineering drawings, supported by a broad aerospace commodity background - Ability to articulate FAI issues both verbally and in writing - Strong computer skills, specifically with the use of Microsoft Office applications and custom databases. Additional Requirements: - Must be a UK National (due to program security restrictions)   This role falls inside IR35.

Industry: Aerospace/Defense Position: Mechanical Inspector Location: Lewisburg, TN **(additional opportunities may be available in surrounding areas)Duration: On-going contract Frequency:  approx (1 visit) per week.    Seeking an experienced Aerospace Quality Source Inspector near Lewisburg, TN for immediate supplier source requirements. Inspector shall travel to local supplier facilities to perform visual and dimensional inspections for manufactured parts, assemblies and/or sub-assemblies prior to shipment. Inspections will be on an as needed basis utilizing customer processes and inspection/reporting requirements. Required to report inspection results via web application. - - Candidate must own a working laptop and cell phone - Willing to utilize personal vehicle - Must be able to work in manufacturing environment and provide PPE if required by supplier - Ability to stand / sit / kneel / squat if required for inspection - Must be able to pass a background screening and Eye Exam Requirements:  - Candidate must have practical experience performing in-process and final inspections on complex machined parts, composite parts, assemblies, and / or sub-assemblies. - The inspections will be performed to engineering requirements specified per ANSI Y14.5 – Geometric Dimensioning and Tolerance (GD&T) - Must have the ability to read / interpret engineering drawings and Purchase Orders (POs). - The candidate must have experience using various mechanical inspection tools, such as micrometers and calipers. - Experience performing First Article Inspections (FAIs) in accordance to the AS9102 standard and knowledge is required. Ideal candidate will have a minimum of five years’ experience performing inspections in aerospace or military / defense manufacturing with proficiency using Microsoft Word and Excel. - Minimum 5 years mechanical source inspection experience. Experience must be within the last 2 years in aerospace or military/defense manufacturing. - Minimum 2 years of hands on First Article Inspection (FAI) experience to AS9102. This must be a strong knowledge and understanding. - Minimum 5 years’ experience inspecting Complex Machine Parts/Assemblies/Composite Parts. - Candidate must have a strong knowledge and understand of GD&T per ANSI Y. 14.5 - Knowledge of tight tolerance is required. - Will be working as an independent contractor (1099) if not redeployment.  - Must have LLC/DBA or able to obtain an LLC/DBA if not VTR W2 Field Employee - Must be a U.S. Citizen      

Industry: Aerospace/Defense Position: Field Quaity Engineer Location: Primary Remote 80% of the time. Potential travel may occur within regional area. Duration: 1 year Frequency: Full-time Pay Range: $45/hr - $50/hr   Duties: First Article Inspection Reports (FAIR) - Using the First Article Inspection process, IAW customer procedures. - Review and disposition Supplier FAIR packaged in Net Inspect and shall ensure compliance with AS9102 industry standard requirements. - Activities to include paperwork review, over-inspection, and working with the supplier to resolve any non-compliance with the AS9102 & Customer requirements.      Self-Release (SR) Audits - Using the Product Release process IAW checklist & Customer procedures the FQE Self Releases  Audits at assigned suppliers. - Activities for completion of SR Audits will include paperwork review, working with suppliers to resolve non-compliance to the Customer and industry requirements    APQP - APQP review activities will be in accordance with Customer procedures and industry requirements at assigned suppliers. - Activities shall include review of APQP packages, artifact checklist review and disposition of APQP artifacts and Part Submission warranting support. - FQE shall work with their assigned suppliers to resolve non-compliances to the requirements.       Required Skills - Experience in reviewing Advanced Product Quality Packages (APQP) - Experience in reviewing and approving First Article Inspection Reports (FAIRs) per AS9102. - Must be proficient in Geometrical, Dimension and Tolerancing. (GD&T) - Must be able to pass a written GD&T exam with a score of 90% or higher. - Experience with layout and precision inspection techniques and the utilization of inspection hand tools to validate product conformity. - Demonstrated strong leadership, interpersonal and communication skills. - Quality engineering experience. (ASQ, CQA, or CQE certifications) - Knowledge of various manufacturing processes and product family’s - In-depth knowledge & usage of Root Cause Corrective Actions (RCCA) tools - Working knowledge of ISO9001 or equivalent Quality Management System (QMS) - Experience performing audits for customer Self Release Audit Program. - Demonstrated ability as a self-starting, self-directed individual. - Demonstrated technical knowledge of mechanical, Electro Mechanical and/or electrical products & processes. (Depends on location) - Technical knowledge of castings (Depends on location) - Technical knowledge of Circuit-Card Assemblies (Depends on location) - Proficient using common software (MS Word, Excel, Power Point, Project, etc.) - Must complete the Customer Job Qualifications requirements within 6 months. - Must be a citizen of the country that the work will be performed in - BA/BS degree in a technical discipline (i.e., engineering, manufacturing, quality assurance) with 5 years of experience in aerospace, automotive and/or other related industries - In lieu of a formal education, at least 13 years of progressive experience in aerospace, automotive and/or other related industries Desirable Skills - IPC 610 certified or trained. - Working knowledge of AS9100 Quality Management System requirements - Process control & continuous improvement tools. - ASQ, CQA, or CQE certification - RAB auditor accreditation - Experience managing projects.   “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law.  Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”

Industry: Aerospace/Defense Position: Field Quaity Engineer Location: Primary Remote 80% of the time. Potential travel may occur within regional area. Duration: 1 year Frequency: Full-time   Duties: First Article Inspection Reports (FAIR) - Using the First Article Inspection process, IAW customer procedures. - Review and disposition Supplier FAIR packaged in Net Inspect and shall ensure compliance with AS9102 industry standard requirements. - Activities to include paperwork review, over-inspection, and working with the supplier to resolve any non-compliance with the AS9102 & Customer requirements.      Self-Release (SR) Audits - Using the Product Release process IAW checklist & Customer procedures the FQE Self Releases  Audits at assigned suppliers. - Activities for completion of SR Audits will include paperwork review, working with suppliers to resolve non-compliance to the Customer and industry requirements    APQP - APQP review activities will be in accordance with Customer procedures and industry requirements at assigned suppliers. - Activities shall include review of APQP packages, artifact checklist review and disposition of APQP artifacts and Part Submission warranting support. - FQE shall work with their assigned suppliers to resolve non-compliances to the requirements.       Required Skills - Experience in reviewing Advanced Product Quality Packages (APQP) - Experience in reviewing and approving First Article Inspection Reports (FAIRs) per AS9102. - Must be proficient in Geometrical, Dimension and Tolerancing. (GD&T) - Must be able to pass a written GD&T exam with a score of 90% or higher. - Experience with layout and precision inspection techniques and the utilization of inspection hand tools to validate product conformity. - Demonstrated strong leadership, interpersonal and communication skills. - Quality engineering experience. (ASQ, CQA, or CQE certifications) - Knowledge of various manufacturing processes and product family’s - In-depth knowledge & usage of Root Cause Corrective Actions (RCCA) tools - Working knowledge of ISO9001 or equivalent Quality Management System (QMS) - Experience performing audits for customer Self Release Audit Program. - Demonstrated ability as a self-starting, self-directed individual. - Demonstrated technical knowledge of mechanical, Electro Mechanical and/or electrical products & processes. (Depends on location) - Technical knowledge of castings (Depends on location) - Technical knowledge of Circuit-Card Assemblies (Depends on location) - Proficient using common software (MS Word, Excel, Power Point, Project, etc.) - Must complete the Customer Job Qualifications requirements within 6 months. - Must be a citizen of the country that the work will be performed in - BA/BS degree in a technical discipline (i.e., engineering, manufacturing, quality assurance) with 5 years of experience in aerospace, automotive and/or other related industries - In lieu of a formal education, at least 13 years of progressive experience in aerospace, automotive and/or other related industries Desirable Skills - IPC 610 certified or trained. - Working knowledge of AS9100 Quality Management System requirements - Process control & continuous improvement tools. - ASQ, CQA, or CQE certification - RAB auditor accreditation - Experience managing projects.   “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law.  Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”

Industry: Aerospace/Defense Position: Field Quaity Engineer Location: Primary Remote 80% of the time. Potential travel may occur within regional area. Duration: 1 year Frequency: Full-time Pay Range: $35/hr - $37/hr   Duties: First Article Inspection Reports (FAIR) - Using the First Article Inspection process, IAW customer procedures. - Review and disposition Supplier FAIR packaged in Net Inspect and shall ensure compliance with AS9102 industry standard requirements. - Activities to include paperwork review, over-inspection, and working with the supplier to resolve any non-compliance with the AS9102 & Customer requirements.      Self-Release (SR) Audits - Using the Product Release process IAW checklist & Customer procedures the FQE Self Releases  Audits at assigned suppliers. - Activities for completion of SR Audits will include paperwork review, working with suppliers to resolve non-compliance to the Customer and industry requirements    APQP - APQP review activities will be in accordance with Customer procedures and industry requirements at assigned suppliers. - Activities shall include review of APQP packages, artifact checklist review and disposition of APQP artifacts and Part Submission warranting support. - FQE shall work with their assigned suppliers to resolve non-compliances to the requirements.       Required Skills - Experience in reviewing Advanced Product Quality Packages (APQP) - Experience in reviewing and approving First Article Inspection Reports (FAIRs) per AS9102. - Must be proficient in Geometrical, Dimension and Tolerancing. (GD&T) - Must be able to pass a written GD&T exam with a score of 90% or higher. - Experience with layout and precision inspection techniques and the utilization of inspection hand tools to validate product conformity. - Demonstrated strong leadership, interpersonal and communication skills. - Quality engineering experience. (ASQ, CQA, or CQE certifications) - Knowledge of various manufacturing processes and product family’s - In-depth knowledge & usage of Root Cause Corrective Actions (RCCA) tools - Working knowledge of ISO9001 or equivalent Quality Management System (QMS) - Experience performing audits for customer Self Release Audit Program. - Demonstrated ability as a self-starting, self-directed individual. - Demonstrated technical knowledge of mechanical, Electro Mechanical and/or electrical products & processes. (Depends on location) - Technical knowledge of castings (Depends on location) - Technical knowledge of Circuit-Card Assemblies (Depends on location) - Proficient using common software (MS Word, Excel, Power Point, Project, etc.) - Must complete the Customer Job Qualifications requirements within 6 months. - Must be a citizen of the country that the work will be performed in - BA/BS degree in a technical discipline (i.e., engineering, manufacturing, quality assurance) with 5 years of experience in aerospace, automotive and/or other related industries - In lieu of a formal education, at least 13 years of progressive experience in aerospace, automotive and/or other related industries Desirable Skills - IPC 610 certified or trained. - Working knowledge of AS9100 Quality Management System requirements - Process control & continuous improvement tools. - ASQ, CQA, or CQE certification - RAB auditor accreditation - Experience managing projects.   “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law.  Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”

Industry: Aerospace/Defense Position: Field Quaity Engineer Location: Primary Remote 80% of the time. Potential travel may occur within regional area. Duration: 1 year Frequency: Full-time   Duties: First Article Inspection Reports (FAIR) - Using the First Article Inspection process, IAW customer procedures. - Review and disposition Supplier FAIR packaged in Net Inspect and shall ensure compliance with AS9102 industry standard requirements. - Activities to include paperwork review, over-inspection, and working with the supplier to resolve any non-compliance with the AS9102 & Customer requirements.      Self-Release (SR) Audits - Using the Product Release process IAW checklist & Customer procedures the FQE Self Releases  Audits at assigned suppliers. - Activities for completion of SR Audits will include paperwork review, working with suppliers to resolve non-compliance to the Customer and industry requirements    APQP - APQP review activities will be in accordance with Customer procedures and industry requirements at assigned suppliers. - Activities shall include review of APQP packages, artifact checklist review and disposition of APQP artifacts and Part Submission warranting support. - FQE shall work with their assigned suppliers to resolve non-compliances to the requirements.       Required Skills - Experience in reviewing Advanced Product Quality Packages (APQP) - Experience in reviewing and approving First Article Inspection Reports (FAIRs) per AS9102. - Must be proficient in Geometrical, Dimension and Tolerancing. (GD&T) - Must be able to pass a written GD&T exam with a score of 90% or higher. - Experience with layout and precision inspection techniques and the utilization of inspection hand tools to validate product conformity. - Demonstrated strong leadership, interpersonal and communication skills. - Quality engineering experience. (ASQ, CQA, or CQE certifications) - Knowledge of various manufacturing processes and product family’s - In-depth knowledge & usage of Root Cause Corrective Actions (RCCA) tools - Working knowledge of ISO9001 or equivalent Quality Management System (QMS) - Experience performing audits for customer Self Release Audit Program. - Demonstrated ability as a self-starting, self-directed individual. - Demonstrated technical knowledge of mechanical, Electro Mechanical and/or electrical products & processes. (Depends on location) - Technical knowledge of castings (Depends on location) - Technical knowledge of Circuit-Card Assemblies (Depends on location) - Proficient using common software (MS Word, Excel, Power Point, Project, etc.) - Must complete the Customer Job Qualifications requirements within 6 months. - Must be a citizen of the country that the work will be performed in - BA/BS degree in a technical discipline (i.e., engineering, manufacturing, quality assurance) with 5 years of experience in aerospace, automotive and/or other related industries - In lieu of a formal education, at least 13 years of progressive experience in aerospace, automotive and/or other related industries Desirable Skills - IPC 610 certified or trained. - Working knowledge of AS9100 Quality Management System requirements - Process control & continuous improvement tools. - ASQ, CQA, or CQE certification - RAB auditor accreditation - Experience managing projects.   “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law.  Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”

  Location: Ankara, Turkey  Schedule: Approx 16 hrs / week; could increase after initial on-site Contract: 60 days with possible extension     Seeking an experienced Aerospace Quality Source Inspector local to Ankara, Turkey to support inspection and root cause corrective actions regarding current quality issues. As the on-site focal for our customer, ensuring quality product, including but not limited to: machined and sheet metal components within a rear pressure bulkhead assembly.    Job Description: - Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications. - The inspector will be required to report inspection accept / reject information directly to the customer via web application. - Recommending neccessary adjustments and changes to production processes - Containment of nonconforming product  Requirements: - Candidate must have practical experience performing in-process and final inspections on complex machined parts, composite parts, assemblies, and / or sub-assemblies. - The inspections will be performed to engineering requirements specified per ANSI Y14.5 – Geometric Dimensioning and Tolerance (GD&T) - Must have the ability to read / interpret engineering drawings and Purchase Orders (POs). - The candidate must have experience using various mechanical inspection tools, such as micrometers and calipers. - Experience performing First Article Inspections (FAIs) in accordance to the AS9102 standard and knowledge is required. Ideal candidate will have a minimum of five years’ experience performing inspections in aerospace or military / defense manufacturing with proficiency using Microsoft Word and Excel. - Candidate should be computer savvy and own a laptop for this assignment. - Minimum 5 years mechanical source inspection experience. Experience must be within the last 2 years in aerospace or military / defense manufacturing. - Minimum 2 years of hands on first article inspection (FAI) experience to AS9102. This must be a strong knowledge and understanding. - Minimum 5 years’ experience inspecting Complex Machine Parts/Assemblies/Composite Parts. - Candidate must have a strong knowledge and understand of GD&T per ANSI Y. 14.5 - Knowledge of tight tolerance is required. - Candidate must have mobile phone availability and their own laptop, with e-mail and internet access, to bring on site to the supplier location. - Strong computer skills. Source inspection information is input into the customer's system in SAP. - Will be working as an independent contractor (1099). - Must have LLC/DBA or able to obtain an LLC/DBA

Industry: Aerospace/Defense Position: Field Quaity Engineer Location: Primary Remote 80% of the time. Potential travel may occur within regional area. Duration: 1 year Frequency: Full-time   Duties: First Article Inspection Reports (FAIR) - Using the First Article Inspection process, IAW customer procedures. - Review and disposition Supplier FAIR packaged in Net Inspect and shall ensure compliance with AS9102 industry standard requirements. - Activities to include paperwork review, over-inspection, and working with the supplier to resolve any non-compliance with the AS9102 & Customer requirements.      Self-Release (SR) Audits - Using the Product Release process IAW checklist & Customer procedures the FQE Self Releases  Audits at assigned suppliers. - Activities for completion of SR Audits will include paperwork review, working with suppliers to resolve non-compliance to the Customer and industry requirements    APQP - APQP review activities will be in accordance with Customer procedures and industry requirements at assigned suppliers. - Activities shall include review of APQP packages, artifact checklist review and disposition of APQP artifacts and Part Submission warranting support. - FQE shall work with their assigned suppliers to resolve non-compliances to the requirements.       Required Skills - Experience in reviewing Advanced Product Quality Packages (APQP) - Experience in reviewing and approving First Article Inspection Reports (FAIRs) per AS9102. - Must be proficient in Geometrical, Dimension and Tolerancing. (GD&T) - Must be able to pass a written GD&T exam with a score of 90% or higher. - Experience with layout and precision inspection techniques and the utilization of inspection hand tools to validate product conformity. - Demonstrated strong leadership, interpersonal and communication skills. - Quality engineering experience. (ASQ, CQA, or CQE certifications) - Knowledge of various manufacturing processes and product family’s - In-depth knowledge & usage of Root Cause Corrective Actions (RCCA) tools - Working knowledge of ISO9001 or equivalent Quality Management System (QMS) - Experience performing audits for customer Self Release Audit Program. - Demonstrated ability as a self-starting, self-directed individual. - Demonstrated technical knowledge of mechanical, Electro Mechanical and/or electrical products & processes. (Depends on location) - Technical knowledge of castings (Depends on location) - Technical knowledge of Circuit-Card Assemblies (Depends on location) - Proficient using common software (MS Word, Excel, Power Point, Project, etc.) - Must complete the Customer Job Qualifications requirements within 6 months. - Must be a citizen of the country that the work will be performed in - BA/BS degree in a technical discipline (i.e., engineering, manufacturing, quality assurance) with 5 years of experience in aerospace, automotive and/or other related industries - In lieu of a formal education, at least 13 years of progressive experience in aerospace, automotive and/or other related industries Desirable Skills - IPC 610 certified or trained. - Working knowledge of AS9100 Quality Management System requirements - Process control & continuous improvement tools. - ASQ, CQA, or CQE certification - RAB auditor accreditation - Experience managing projects.   “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, age, political affiliation, marital status, disability status, protected veteran status, or any other characteristic protected by law.  Verify, Inc. will not tolerate discrimination or harassment based on any of these characteristics.”

Industry: Aerospace/Defense   Position: Source Inspection   Location: Mount Dora,FL   Frequency – 1 visits per Day 3 hours each   Duration: ASAP-5/2024       Job Description: Verifies completed product to purchase order, drawing and associated specifications. Ability to adequately inspect Aerospace level mechanical components and assemblies including welded and machined parts for compliance with industry and Customer specifications. Knowledge of standard inspection tools to include CMMs is required. Previous machine shop experience, final inspections and Aerospace products.   Requirements: - 5+ Years experience in Aerospace Receiving and/or Final Inspection - Must be a US Citizen - 5+ years’ experience in FAI and AS9102       Skills Requirement: - Attention to Detail - Strong communication skills - Organized - Able to operate computers

*** Supplier Quality Engineer / Assurance Engineer (Defence) ***   Currently seeking an experienced Supplier Quality Engineer to support a program where we need to deploy someone within a supplier facility near Stockport.  With a focus on ensuring that acceptable standards are met and continually achievable, the role will provide support across a number of assigned projects, monitoring progress of hardware and electrical aspects of complex system development for technical and process compliance with a focus on oversight, inspection and acceptance of system deliverables.   Responsibilities:  - Conduct QA activities during initial acquisition and programme execution in accordance with company processes and procedures - Provide independent oversight on assigned programmes to ensure compliance with all required external standards, internal command media and contractual requirements - Participate in bid and programme Gate Reviews to assist the teams in achieving mission success - Work with multiple teams to assure Supplier Quality, including supplier on-boarding activities and ongoing supplier performance management, and ensuring projects complete quarterly assessments of critical suppliers - Establish effective relationships with key supplier quality personnel - Assist with the flow down of QA requirements to suppliers - Support Risk and Opportunity Management activities on bids and programmes - Support sub-contract management activities during programme execution - Develop and document any programme-specific processes required - Ensure customer deliverables are of acceptable quality and meet all required standards and contractual requirements - Liaise with customers and other third parties including suppliers regarding all aspects of Mission and Quality Assurance for assigned projects - Provide QA reports on a weekly and as-required basis, escalating significant issues or risks to the Programme Manager and the Mission Assurance Manager - Collect, interpret and present QA metrics to the Programme Manager, Mission Assurance Manager and the Technical Director to support the development of process improvement initiatives - Follow up audits to validate the resolution of non-conformities and findings raised   Background and Experience:  - Quality Assurance experience, ideally in a systems engineering environment - Experience of UK MOD assurance requirements and working practices - Track record of delivering to identified Quality Assurance requirements - IPC 610/620 Certification for electrical inspection - Experience of leading quality improvement activities, including lessons learnt, root cause analysis - Experience of risk identification, reporting and management - A good understanding of systems engineering principles and methodologies - Sound working knowledge of Defence engineering standards and working practices including AQAP 2110, Def Stan 05-57, IEC 61508 - Knowledge of ISO 9001 and 27001 - Self-motivated and able to work both autonomously and as part of a wider team - Excellent interpersonal skills, able to engage effectively with a wide range of stakeholders, suppliers and customers - Strong analytical and problem-solving skills - Proficient IT skills, specifically in MS Office tools - Flexible and responsive attitude - Proficient at multi-tasking, working under pressure and to tight deadlines - Excellent attention to detail   Additional Requirements: - Must be a UK National (due to program security restrictions) - Ideally holds UK Government Security Clearance - Ability to travel within the UK, to include visits to our customer location for progress meetings.   This activity is inside IR35 (Umbrella Company Required)  

*** Supplier Quality Engineer / Assurance Engineer (Defence) ***   Currently seeking an experienced Supplier Quality Engineer to support a program where we need to deploy someone within a supplier facility near Bedford.  With a focus on ensuring that acceptable standards are met and continually achievable, the role will provide support across a number of assigned projects, monitoring progress of hardware and electrical aspects of complex system development for technical and process compliance with a focus on oversight, inspection and acceptance of system deliverables.   Responsibilities:  - Conduct QA activities during initial acquisition and programme execution in accordance with company processes and procedures - Provide independent oversight on assigned programmes to ensure compliance with all required external standards, internal command media and contractual requirements - Participate in bid and programme Gate Reviews to assist the teams in achieving mission success - Work with multiple teams to assure Supplier Quality, including supplier on-boarding activities and ongoing supplier performance management, and ensuring projects complete quarterly assessments of critical suppliers - Establish effective relationships with key supplier quality personnel - Assist with the flow down of QA requirements to suppliers - Support Risk and Opportunity Management activities on bids and programmes - Support sub-contract management activities during programme execution - Develop and document any programme-specific processes required - Ensure customer deliverables are of acceptable quality and meet all required standards and contractual requirements - Liaise with customers and other third parties including suppliers regarding all aspects of Mission and Quality Assurance for assigned projects - Provide QA reports on a weekly and as-required basis, escalating significant issues or risks to the Programme Manager and the Mission Assurance Manager - Collect, interpret and present QA metrics to the Programme Manager, Mission Assurance Manager and the Technical Director to support the development of process improvement initiatives - Follow up audits to validate the resolution of non-conformities and findings raised   Background and Experience:  - Quality Assurance experience, ideally in a systems engineering environment - Experience of UK MOD assurance requirements and working practices - Track record of delivering to identified Quality Assurance requirements - IPC 610/620 Certification for electrical inspection - Experience of leading quality improvement activities, including lessons learnt, root cause analysis - Experience of risk identification, reporting and management - A good understanding of systems engineering principles and methodologies - Sound working knowledge of Defence engineering standards and working practices including AQAP 2110, Def Stan 05-57, IEC 61508 - Knowledge of ISO 9001 and 27001 - Self-motivated and able to work both autonomously and as part of a wider team - Excellent interpersonal skills, able to engage effectively with a wide range of stakeholders, suppliers and customers - Strong analytical and problem-solving skills - Proficient IT skills, specifically in MS Office tools - Flexible and responsive attitude - Proficient at multi-tasking, working under pressure and to tight deadlines - Excellent attention to detail   Additional Requirements: - Must be a UK National (due to program security restrictions) - Ideally holds UK Government Security Clearance - Ability to travel within the UK, to include visits to our customer location for progress meetings.   This activity is inside IR35 (Umbrella Company Required)  

Industry: Aerospace/Defense Position: Source Inspection Location: Longview,TX Frequency – 2 visits per Year 4 hours each Duration: 1 Year   Job Description: Verifies completed product to purchase order, drawing and associated specifications. Ability to adequately inspect Aerospace level mechanical components and assemblies including welded and machined parts for compliance with industry and Customer specifications. Knowledge of standard inspection tools to include CMMs is required. Previous machine shop experience, final inspections and Aerospace products. Skills Requirement: - Attention to Detail - Strong communication skills - Organized - Able to operate computers Requirements: - 5+ Years experience in Aerospace Receiving and/or Final Inspection - Must be a US Citizen - 5+ years’ experience in FAI and AS9102 - Will be working as an independent contractor (1099). - Must have LLC/DBA or able to obtain an LLC/DBA

Industry: Aerospace/Defense Position: Source Inspection Location: Aranjuez, Spain Frequency – 1 visits per Year 4 hours each Duration: 1 Week   Job Description: Verifies completed product to purchase order, drawing and associated specifications. Ability to adequately inspect Aerospace level mechanical components and assemblies including welded and machined parts for compliance with industry and Customer specifications. Knowledge of standard inspection tools to include CMMs is required. Previous machine shop experience, final inspections and Aerospace products.   Requirements: - 5+ Years experience in Aerospace Receiving and/or Final Inspection - Must be a US Citizen - 5+ years’ experience in FAI and AS9102 - experience with MIL-STD-130       Skills Requirement: - Attention to Detail - Strong communication skills - Organized - Able to operate computers